Опубликовано 2013-02-05 13:55:05 автором Ruslan
Gromov programming device
Simple version control for a AVR - this five wires , but if there is at least some soldering skills , collect better programmer Gromov.
This scheme invented Gromov , creator Algorithm Builder. The scheme is very simple. Here for matching levels using a regular resistor divider , and diodes (you can take, for example , 1n40007) for matching polarity. I for controller firmware used CodeVisionAVR, but can juzat and UniProf and AvrDude. Payment can be made on the breadboard or draw it all in Sprint Layout and LUT method erase marker or paint . For assembly programmer Gromov , we need:
| Radiodetal | Model | Number | The main characteristic | Shop |
| resistor | 7 | 1 k | Buy | |
| Diode | 1N4148 or 1n40007 | 3 | a low-power | Buy |
For this firmware MK programmer voltage MK should not be below 5 volts. I used this for two outermost contacts from USB . If you've never worked with microcontrollers , you can use the material with this article .
If does not work , then there is little options :
- Error Spike programmer Nonoperating
- MK
- incorrectly soldered wires to the microcontroller .
Комментарии - (0)